Seamless gutter installation
When the old gutters leak at every joint or can't keep up with a July thunderstorm, new seamless runs are usually the fix.
Seamless gutters are rolled out of a coil of aluminum by a machine on the installer's truck, right in your driveway. Each run is cut to the exact length of that wall, so the only joints are at the corners and the downspout outlets. Fewer joints means fewer places to drip, and it's the reason most replacement jobs around Johnson City use seamless aluminum rather than snap-together sections.
How do I know it's time to replace?
- Seams that keep leaking even after they've been resealed
- Sections that sag or hold water hours after the rain stops
- Rust on old steel gutters, or cracked and brittle vinyl
- Overflow along whole runs even when the gutters are clean
- Fascia boards that are soft, stained or split behind the gutter
- A new roof going on, which is the easiest time to change gutters too
Five-inch or six-inch?
Five-inch K-style aluminum is the standard size on most houses. Six-inch gutters hold and move a lot more water, and they pair with larger 3-by-4-inch downspouts that clog less. They're worth a look for big or steep roof sections, long runs, and corners where two roof slopes dump into one spot. With Johnson City's heaviest rain coming in summer cloudbursts, the bigger size can be the difference between water in the gutter and water down the siding. Ask your installer to explain why they recommend one size over the other for each side of the house.
Which material makes sense?
- Aluminum. Light, doesn't rust and comes in dozens of colors. The default for seamless work.
- Copper. Long-lived and handsome, often in half-round profiles on older homes such as those near downtown Johnson City or in Jonesborough's historic district.
- Steel. Strong, but it can rust once the coating wears through.
- Vinyl. Inexpensive and DIY-friendly, but sectional and more prone to sagging and cracking in cold snaps.
What does a good installation look like?
- A slight, steady pitch toward each downspout, with no low spots
- Hidden hangers spaced closely and screwed into solid wood
- Downspouts placed at the low ends and sized for the roof area
- Soft fascia replaced before the new gutters go up
- Downspouts that discharge away from the foundation, not beside it
What drives the price of new gutters?
- Linear feet and number of downspouts.
- Size and material. Six-inch and copper cost more than 5-inch aluminum.
- Height and roof pitch.
- Tear-off and fascia repair.
- Guards. Adding them while the gutters go up usually costs less than a separate trip later.
We don't quote prices. The installer prices the job after measuring your gutter runs, counting downspouts and looking at the roof pitch and the trees overhead, so any number you hear on the phone before that visit is only a ballpark.
Where we connect you with help
Common questions
How long do seamless aluminum gutters last?
Installed well, they commonly last decades. Corner sealant and hangers may need attention sooner than the gutter itself.
Can new gutters go on old fascia?
Only if the wood is sound. Soft or rotten fascia should be replaced first, because the hangers need solid wood to hold.
Related services
More background: Johnson City gutter guard guide.
Done hauling the ladder out every November?
Call and a local installer will come look at your roofline, your trees and your gutters, then quote guards that fit.